Wedding Highlights - 1 year later :)

I can't believe that Clint and I are 

already celebrating our 1 year wedding anniversary!
((happy anniversary nugget!  i love you!))

Since I never got around to the original wedding post I was
going to do, what better way to reminisce about our wedding than with a 'wedding highlights' post - a small compilation of 

details and photos of the big day.

The resort:

We had a destination wedding at Couples, Tower Isle

in Ocho Rios, Jamaica.  It's an all-inclusive resort for

couples (adults only) and we basically chose it solely because they have private island you can rent for your reception. 
All I can say is that it was amazing!

the island (nude beach by day, wedding venue by night)

The dress:

When my friend +Mira Lynn got engaged and started looking
for dresses, she asked me what kind of dress I wanted. I thought
about it a bit, and drew her a picture of what I wanted -
even though I'd never seen a dress like that.

Then I found it online when looking at dresses for Mira.
A near exact match.  The Alix & Kelly 'Kate' Dress...  I found my dream dress only to learn that the designers had left the dressmaking business about a year prior.

After months of futile searching on pretty much every 

used-dress website known to man (I found tons of people looking to BUY the dress, but no one was selling it), I was lucky enough to find one on ebay - new, never worn and possibly my size! 

(Who really knows with wedding dress sizing??)

So I bought an expensive and unreturnable dress on ebay,
sight unseen, having no idea if it would fit OR look good,
and basically hoped for the best.

Oh wait, did I mention this all occurred before Clint and
I even got engaged?  Hehe... Clint (my lovely boyfriend at the time) assured me that if I didn't like it I could always try to sell it, but at least someday I wouldn't be haunted by a

phantom dream dress that no real-life dress

could ever live up to.  (So wise!)

And that was how I ended up with the Alix & Kelly Kate Dress. :)

And while some may think that weddings are all about

the bride, Clint was not to be outdone in his super sharp, super slim Hugo Boss suit.  So sexy...  and look at that tie.
He looked so handsome!

is he a model??

The photos:

For our photography, we went with Justin Lee - 

a phenomenal photographer from San Diego.  He shot the

photos of the resort that sold the resort for me, so I figured
we couldn't go wrong with him!  His photography has a distinctive character - slightly vintage, slightly Americana
and slightly edgy.  We LOVE our photos! 

http://justinleephotography.com/

One of the best things about the resort was that there 
were so many unique areas to shoot - we got a really wide 
array of backgrounds for our photos.  Choosing just a few to highlight from ~700 photos is no easy feat, but here's
some of our absolute favorite shots from the day.

 

Overall, our wedding day (and wedding week), was 
everything we could have asked for and more.  If we could do
it again, we wouldn't change a thing.

We're so thankful for the friends and family that were 

able to celebrate with us!  We hope that everyone enjoyed the wedding - but who wouldn't love a wedding pool party??

(Did I mention the private island had a pool & pool bar?)

p.s.  big thank you to +Mira Lynn for leaving the party to bring Clint and I some swimwear.  :)  <3

Bathroom Updates - Tile, Toilet, Mirror, Lights and Vanity!

     Thanks to a lovely mid-March snow-day induced 3-day weekend, the bathroom has come a long way since the March 1 update!  I mean, ITS PRACTICALLY ALMOST DONE!  It's not really done - there's no bathtub - but seriously, it's practically like a real bathroom now! And most importantly - it has a toilet!  Which means I don't have to run downstairs at 2, 3, 4 or 5 in the morning to pee. :) Yay! It was a lot of hard work, but totally worth it!

     After getting the wonderboard in and priming the walls for paint, it was time to start tiling the floor.  We weren't really looking forward to this because we chose admittedly difficult tile to work with - the tiles are a mosaic lantern pattern, and each tile is approx 2"x3".  We started by laying our initial straight line (which is hard when there isn't a straight line in your bathroom, period, haha), and then worked out from there.  Clint dedicatedly laid thinset, and I laid the tile behind him.  Though seemingly harmless, this was a little tiring at this stage of my pregnancy. And then I was (stupidly) laying tile while moving in a backwards direction and I managed to squarely step into the open vent hole on the bathroom floor.  My leg fell in and got scraped from my foot to my knee... and I tweaked my preggo back... and I'm lucky that there's a drop ceiling in the kitchen below the bathroom and I didn't poke my foot or the vent shaft through the kitchen ceiling!  :)  Other than that the process went pretty well.  

  

     The next step on the checklist was getting paint on those walls.  Unfortunately it's been tough to get a good picture that really captures the colors well between the never ending gray weather and the unnatural lighting - but I tried.  The lighter wall is called 'lavender heather' and the darker wall is dark purple with the faux brushed pearl effect.  I was afraid that the faux effect would be really difficult and time consuming, but it wasn't that bad!

 

     The following day we finally grouted the tile. And by we, I mean Clint and his brother Erin.  So I'm not really sure how tough the grouting process was, but I'm sure it was arduous.  It was also really messy since we decided to use a black grout to really accentuate the shape of the tile.  A bit after the initial grouting was done, Clint and I had to go up and buff the tiles and clean them up.  !!THAT WAS HELL!!  I think we waited a touch too long and the grout wasn't coming off very easily.  We had to hard-scrub every curvy grout-line, for hundreds of tiles.  We literally spent hours doing this.  So the moral of the story is - if you want to make your bathroom tiling experience way more time consuming and difficult than it can be, choose a curvy white mosaic tile and pair it with black grout.  :)  But at the end of the day, I love the way the tile looks, so again, totally worth it.

     After the paint and tile went in, we could actually begin to install some of the bathroom elements!  This was the part I was most excited for because I spent days and days looking at thousands of sinks, faucets, lights, dressers, tiles, mirrors, etc. trying to find elements that would match my vision for the bathroom.  (If you know me, you probably know that I'm very particular...)  So while I was excited, I was also nervous because it's hard to imagine what things will look like before they're actually installed.  Would I love it or would I hate it?!?!  Fortunately, I'm super excited and really pleased with the way things are shaping up so far! 

     With the help of Clint's Dad, the first elements to go in were the wall faucet and the light fixtures.  I absolutely love the antique look of the chrome elephant nose faucet - and the cross-bar handles are nearly a perfect match to the set on the tub.  I debated heavily about if we should use these Pottery Barn sconces because they weren't chrome (and pretty much all of our other fixtures are chrome), but I figured at least the bases are black, which should match our vanity top, and the shiny metallic mercury glass had a bit of a chrome feel to it as well.

   

     Next up was the toilet, mirror and vanity.  For as much as I tried to save money in this reno, there were certain elements I couldn't find "cheap" and didn't want to compromise on.  So, our toilet is a really pretty and slightly antique-y looking Kohler, and the mirror also came from Pottery Barn.  I actually had a hard time finding a large mirror that was wide enough, but narrow enough to fit between the vanity and our short ceiling.  

    I wasn't savvy enough to take any photos of the toilet with the seat down - but if you could see the tank, you'd see that it has a nice rectangular shape, and the front bows out - which matches the shape of the vanity and also draws in the curves of the tile.  (I'll make sure the seat is down for the completion post!)  So here's everything that we have currently installed!

     You may remember that the sink was a vessel sink, and I was contemplating dropping it into the vanity.  As you can see, we did just that.  We found that there wasn't a ton of space between the faucet and the sink, so the extra 1-2 inches gained made a big difference in the usability of the faucet.  :)  I also think that dropping the sink into the vanity gave it a more seamless look.  The size and shape of the sink ended up fitting the vanity perfectly!

     And here is one last picture of the space in 'natural' morning lighting.  I really love the way the light lavender draws out the brushed pearl element on the darker purple wall, and I'm really pleased with the way the purples coordinate with our 'black and white' elements.

    
     Hopefully the next bathroom post will actually be our completion post!  We still need to grout the tile in the over-tub toiletry bump-in, and then we need to frame that up to match the window/door trim and add the baseboard.  Then we just need to install the tub and the shower enclosure.  And then we'll actually be done!  I hope it turns out well.  Stay tuned!

Bathroom Renovation Updates

     It feels like we started the bathroom renovation FOREVER ago - and to be honest it kind of was forever ago.  The Bathroom Demolition Day post was from November 11 and now it's almost St. Patty's Day!  Progress has been a little slow - but that's what happens when you don't feel like working on the bathroom at night after work and when 1 half of the working couple is preggo.  :)[FWIW, Clint claims that it's very difficult to work on the bathroom after work when it's dark outside because of the poor lighting in the bathroom...]

     Nonetheless, I'm excited about the progress that has been made, and I think that the stuff left to be done may be easier, or go faster, or at least make us feel like we're making more progress than the stuff we've accomplished so far.  Which begs the question, what have we done so far??

     Well the first thing we had to do was finish the demo - which included stripping the last part of the floor to reach the subfloor and tearing down the built in bump out for the old shower.  We also had to pull up some of the subfloor around the plumbing for the old shower and the toilet, since the plumbing needed to be moved. Here's a photo of what the bathroom looked like in this state.  We used a big paper template of the clawfoot tub to get an idea of where the plumbing would need to be moved.

     Once all the plumbing was moved appropriately - we had to address the subfloor.  Apparently our 1911 house has settled considerably since being built, and there was a good 3-4 inch slope from the back of the bathroom to the front.  There was also some sloping from the outside wall to the inside wall.  Normally with small issues in leveling you can just use self-leveling cement, but these differences were a little too big for cement, so we needed to build a new and level subfloor.  After some debate we decided to build on top of the old subfloor instead of ripping it out and building up or down from the joists.  We lose a bit of height that way (which is unfortunate since our ceilings are so low), but it was a much simpler way to do things.

     

     Building the subfloor was a little bit time consuming, but fortunately not too difficult.  We employed many of the same techniques that we used to build level garden boxes on the sloped ground outside.  We started by laying a small (4x7) board of the new subfloor down at the highest point of the subfloor (the back wall seen in the photo), and jacking up the other side with shims until the new subfloor was level from the back to the front. Then when it was level, we measured that against a 2x4 that would become one of the "new" joists.  Then we cut the joists to replace the shims as the new leveler.  We did that across the length of the bathroom, putting new joists down on top of where all of the old joists were, and a few going the opposite direction for extra support.  Once we had all of the new joists in, we just had to secure the new subfloor onto the joists.

     Then, just when we thought we were done, Clint and his dad realized that the back wall was a bit of a false wall, and decided to tear it down to gain us some more space in the bathroom.  There was also some drain vent pipe that went through the exterior wall (which we've moved to go up and out through the attic now), but it left a hole in the wall of our bathroom, hehe. So this was our new (old) wall, and the new and exciting view from the bathroom. 

     Once the floor work was done, we also had to move the plumbing and electrical around in the walls to account for the changes we were making. We did just about all of the plumbing work ourselves, but Clint's dad was a great source of help for the electrical work. 

     For the remaining plumbing, we needed to move the drain pipes for the new vanity and bring the water pipes up through the wall since we're using a wall-mount faucet instead of a vanity-mounted faucet over the sink.  For the electrical, we added wiring for an exhaust fan since our bathroom didn't have one before, and split the electrical for the old vanity lights since we're going to use a pair of sconces in the new bathroom.  We added a GFI outlet and moved the previously installed one to fit with the new vanity.  We mounted everything in place where we would need them, and added some studs so that we could mount the mirror on studs instead of drywall.  Then the men added insulation to all the walls, and we built a recessed area in the back wall (the one with the hole) where we will hopefully be able to put our shower toiletries. 

     Finally we got to the point where all of the behind the scenes work was done (I thought I took some pictures of the bathroom at this stage - but I couldn't find any on the camera so you'll just have to imagine how great the bathroom looked when all of the plumbing, electrical and stud work was complete).  Clint's brother Erin came over to clean up some of the work in the bathroom and prepare the walls for drywall installation. That was a huge help. We decided to hire the drywall job out because when we did even that small amount of drywall work in the nursery it took weeks and weeks to get the mudding right (and we had to have Clint's brother come over and fix it)... These guys can complete the job in 2 days.  :) I think it's worth it to speed up completion of this bathroom.  I really need this bathroom to be done so we can finish the nursery before Walden arrives!!

     It's crazy the difference that just adding drywall makes to a space!  Suddenly, it almost looks like a real room instead of a disaster zone.  :)

     The mudding still needs to be sanded - but once that's done we'll be ready to prime and paint!  This weekend we're going to start tackling the floor - putting down wonder-board in preparation for tile.  Then once the tile is in and the walls are painted, we can actually start installing the important stuff like the TOILET, tub and vanity/sink!  YAY!!  I'm so excited and can't wait to see how all of the elements will look together when the bathroom is complete.

28 Week Baby Post!

Today is officially the third trimester and 28 weeks - woo!
Just ~12 weeks to go!

While we're still not great about taking routine
baby belly photos, I did manage to get some at the 27 & 28 week marks.  Look at that belly grow!  I feel like it's giant now
and I know I still have a long ways to go...

27 weeks

28 weeks

One exciting development that has emerged in the last 4
weeks was that we finally agreed on a name for baby Davis!
YAY!  Drumroll please...

We'll be excited to be welcoming:

made with love using the Babylock Sofia2
sewing/embroidery machine

(I temporarily owned a sewing/embroidery machine
and went to town on some onesies adding baby Walden's
name and Seahawks logos, hehe.  I've since traded that machine
in for a sewing/quilting machine, so sadly no more machine
embroidery for me.  I am, however, really interested
in developing my free-hand embroidery skills.)

Lastly, around the 24 week mark I went in for
what was probably my last ultrasound, (hopefully) barring
any 3rd trimester complications.

So, we got some 3d/4d pictures of baby Walden.
Generally I've heard these photos don't look great before
30 weeks or so because the babies don't start fattening up until around the 26 week mark.  Nonetheless - here's a small glimpse
of what skinny baby Walden looks like... it'll be
exciting to see how he looks when he's born!

So for those of you creeped out by 3d/4d ultrasounds...

WARNING!  GRAPHIC 3D/4D
ULTRASOUND PHOTOS BELOW!
DO NOT SCROLL DOWN!
(I know they're pretty creepy!)































Hehe, for those of you who AREN'T creeped out 
by 3d/4d photos, or can't contain your curiosity - 
here he is!

 

I dunno if he looks much like me or Clint yet - 

but I do see a very noticeable resemblance to my Dad!!

I guess Walden does have some Fontaine blood in him.

:)

DIY - Repurposing a Buffet or Dresser as a Bathroom Vanity: Part 2

At long last I've finally finished 
the buffet to bathroom vanity conversion!  

Well, the painting part at least... I actually finished several weeks ago,  but I've been tired and lazy and am just now

getting around to posting it.  :)  But what better time
to get back to blogging than when you're home sick
...on your birthday...
(birthday fail!)

I'm pretty sure the last time we saw this buffet

(Part 1) it looked like this:

My initial plan was to go with a strong black top,

to counter the white and separate the white base from the

large white sink.  I got the Rustoleum Satin Black oil-based

enamel paint.  Why?  Mostly because it was one of the only

non-spray black paints that wasn't giant at my
local hardware store.

I started by painting the dresser hardware with this shiny

black paint.  You can see it really shines!

Then I moved on to painting the dresser.

At this point winter was really starting to kick in so

I had to move the painting project inside (the outside temps

were too cold for the paint to dry effectively).

Moving the project indoors was a huge pain - not only because

we don't have a TON of space to work with (you can see

that I'm in this narrow area of the mudroom) - but because

there are cats indoors.  3 of them.

3 hopelessly curious cats.

3 curious cats that decided to jump all over the top of my buffet post-painting, regardless of the barriers I tried to put up.

You can see the paw prints below.

Those pesky kittens...

So I redid it.

And redid it again.

And redid it like, 17 times.

Sanding and painting, sanding and painting.

You can see in the shiny glare that the finish 

wasn't even - I'm not sure if it was user error or the oil based paint or what, but for THE LIFE of me, I could not

get that topcoat to look good.

It was streaky, uneven and terrible.  

Stuff got stuck in the topcoat from pretty much everything I used to apply the paint - and I tried a lot of different things!  

I used a foam roller, a regular roller, a hand bristle brush and a foam brush (all several times) and not once did I get something  with which I was even remotely satisfied.

Perhaps the problem was me, but I'll never 

buy that paint again!!

The longer drying time of the enamel also gave the buffet

ample opportunity to collect as much dust and cat hair

as possible.  TERRIBLE.

So after days (weeks?) of frustration, I finally decided

to screw the oil-based paint, and grabbed some of the 

leftover Rustoleum Hammered spray paint from

the tub remodel and decided to use that.

BEST. DECISION. EVER.

(after marrying Clint, of course)

This made the project 100 million billion times easier.

We moved the buffet into the bathroom that's getting renovated

so I could spray paint to my heart's desire without

worrying about the walls or the carpet or furniture,

and we could close the door to keep the kitties out.

I'm not sure why we didn't think of that earlier.

I also went over the hardware with the hammered paint to make sure it would match, since the hammered black isn't as

strong or shiny as the enamel oil paint.

I finished the painting in just a matter of hours.

Then Clint and I spent a few days going over white areas with about 3 coats of polyacrylic (since it doesn't yellow the way polyurethane does), and also went over the black 

top with about 4-5 coats of polyurethane.

Here's some shots of the nearly finished product.

I apologize about the color - it was a little dark without

lights and not much better with the lights. :/

~tada~

And here's just a couple shots with the huge sink.

I love how well the curve of the sink fits the buffet's shape.

Part of me wants to inset the sink since its a bit high and there's a convenient lip that we could drop into the top, but we haven't made a final decision on that yet.

natural light

overhead lighting

I'm pretty happy with the way it turned out - I think it'll look great in our black and white bathroom. What do you think?